Single tank mold electrolytic ultrasonic cleaning machine
| product brand |
Jietai |
|---|---|
| Features |
1. Working time: Continuously emitting ultrasonic waves. 2. The whole machine structure: It is made of high-quality SUS316 plate and welded with stainless steel material. The welding is firm and beautiful; it does not leak, and the welding joint is polished. 3. Transducer: It adopts Korean ILSAN piezoelectric ceramic chip, which can adapt to long-term working under different temperatures; imported bonding technology ensures that the transducer will not fall off when working for a long time. 4. Ultrasonic generator: Adopting the current international leading technology, using IGBT module and single-chip microcomputer technology, the working condition is stable, the output power is larger and stronger; it has overvoltage, overcurrent, output short circuit and other protection measures. |
| Other properties |
This product supports non-standard customization and can provide design drawings and cleaning plans. |
Product Details
Working principle: Use the mold or the workpiece to be cleaned as the cathode (just put it into the cleaning frame), and use the standard electrode rod as the anode. Using electrolysis of water, oxygen is produced at the anode and hydrogen is produced at the cathode. During the operation, a large amount of hydrogen is generated on the surface of the workpiece, which causes dirt to quickly decompose and peel off from the surface of the workpiece. At the same time, the cavitation effect of ultrasonic waves is used to generate countless small bubbles that collide with the object. The dirt on the workpiece is impacted and blasted to automatically peel off the dirt. At the same time, the special cleaning solution 102C is used to quickly decompose dirt through sufficient chemical reaction. In this way, even complex parts that are difficult to clean, such as grooves, grooves, corners, holes, holes, bites and other complex parts inside the mold, will be cleaned cleanly, and the mold will show a brilliant metallic luster from the inside to the outside. After cleaning the mold, rinse it with water and then soak it with a special water-based rust inhibitor for steel. This rust inhibitor can quickly remove moisture from the mold surface and form a protective layer on the mold surface. After drying, it can be stored or reprocessed. Reproduction will not produce carbide attached to the mold.
Application scope
